Enduro Bearings MR 20307 LLU MAX
Very high-quality sealed bearing Enduro MR 20307 LLU MAX ABEC 3 suitable for the rear construction of full-suspension bikes.
- dimensions 20x30x7 mm
Maximum amount of chrome steel balls
To achieve maximum load, MAX bearings are completely filled with high-quality accuracy class 10 balls. No cage means more balls and 40% more load. The bearings are filled with balls by hand due to the very small tolerance between the inner and outercircle.
High carbon chrome steel rings 52100
The purest steel alloy strong like no other. MAX bearings use marine grease from CRC. Vaseline will remain in the bearing even under extreme conditions. Even salt water will not penetrate and damage the bearing.
Seal type LLU
Each sealing ring has two edges that fit into guide grooves in the inner ring of the bearing. The outer edge preventspenetration of dirt, while the inner keeps the petroleum jelly in the bearing. In operation, this system is practically waterproof, the petroleum jelly in the groove of the inner ring creates a waterproof barrier.
