Enduro Bearings 698 LLU MAX-E ložisko ABEC-3

The high quality Enduro 698 LLU MAX-E ABEC 3 sealing compound is suitable for the rear construction of sprung frames (including Canyon, Yeti ...).

• weight 7.5 g
• Dimensions 8x19x6 / 7.5 mm

Maximum amount of chrome steel balls

To achieve maximum load, the MAX bearings are fully filled with high quality precision class 10 balls. No cage means more balls and 40% more load. Bearings are filled with beads manually due to very smalltolerance between the inner and outer rings.

Chains of high carbon chrome steel 52100

The cleanest steel alloy is solid as no other. MAX bearings use marine lubricant from CRC. Vaseline will remain in the bearings even under extreme conditions. Even salty water does not penetrate in and the bearing does not damage.

LLU type seals

Each sealing ring has two blades that engage in guide grooves in the inner ringbearings. The outer lip prevents the penetration of dirt, while the inner retains the grease in the bearing. While running, this system is practically waterproof, grease in the groove of the inner ring creates a waterproof barrier.